Nickel 201 Seamless Nickel Alloy Steel Tube
Nickel 201 Seamless Nickel Alloy Steel Tube is a high-purity, low-carbon nickel alloy tube known for its excellent mechanical properties, corrosion resistance, and thermal conductivity. These tubes are ideal for use in chemical processing, electronics, and marine applications where high performance and purity are essential. ① STANDARD: ASTM B161/ ASTM B163/ASME SB161/ASME AB163② OD RANGE : 6-257 MM③ THICKNESS RANGE: 1-35 MM
Nickel 201 Alloy (UNS N02201)/2.4068 Chemical Composition
|
Grade |
Ni |
Cu |
Fe |
Mn |
C |
Si |
S |
|
UNS N02200 |
≥99.00 |
≤0.25 |
≤0.40 |
≤0.35 |
≤0.015 |
≤0.35 |
≤0.01 |
|
UNS N02201 |
≥99.00 |
≤0.25 |
≤0.40 |
≤0.35 |
≤0.02 |
≤0.35 |
≤0.01 |
Nickel 201 Alloy (UNS N02201)/2.4068 Mechanical Properties
|
Grade |
Condition |
Tensile Strength |
Yield Strength |
Elongation(%) |
|
N02201 |
Annealed |
≥50(345)ksi(MPa) |
≥12(83)ksi(MPa) |
≥40 |
|
N02201 |
Stress-relieved |
≥60(414)ksi(MPa) |
≥30(207)ksi(MPa) |
≥15 |
|
N02201 OD≤127MM |
Annealed |
≥50000(380)psi(MPa) |
≥12000(80)psi(MPa) |
≥35 |
|
N02201 OD>127MM |
Annealed |
≥50000(345)psi(MPa) |
≥10000(70)psi(MPa) |
≥40 |
|
N02201 |
Stress-relieved |
≥60000(415)psi(MPa) |
≥30000(205)psi(MPa) |
≥15 |
the ASTM B161 ASTMB163 Nickel alloy seamless tube and pipe tolerance
Nickel 201 Alloy (UNS N02201)/2.4068 Applications
Used primarily for parts requiring excellent corrosion and strong magnetic properties such as:
- lead wires
- battery components
- transducers
- sparking electrodes
- heat exchangers
- implantable battery anode/connector tabs for CRM and Neurostimulation devices
- stamped or etched fabrications
One of our Services--Testing
- EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
- Raw Materials Certificate
- 100% Radiography Test Report
- 100% PMI
- Heat Treatment Charts
- Third Party Inspection Report
- Surface roughness and size measurement
- Manufacturer Test Certificate( Impact Testing, Flatten, Spin,Curve, Hardness, Intergranular ,Point corrosions, Grain size, ET,UT, HT...)
- Laboratory Test Certificate from Govt. Approved Lab
- ......
Nickel 201 Alloy (UNS N02201)/2.4068 Material Summary
Nickel 201 alloy is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures.
It is resistant to acids and alkalis, and dry gases at room temperature.
Alloy 201 is a wrought commercially pure Nickel with a maximum carbon level of 0.02%. This alloy provides highly ductile mechanical properties across a wide temperature range.It provides corrosion resistance in neutral to moderately reducing environments. Nickel 201 is ferromagnetic. It provides high thermal and electrical conductivity in comparison to nickel-base alloys, stainless and low alloy steels. Because of its low carbon content (.02% max.) Nickel 201 may be considered for service above 600 °F (316 °C), where alloy 200 with higher carbon content is not recommended.
Standard download
Related Products
Seamless Inconel 600 Nickel Alloy Pipe
Seamless Inconel 600 Nickel Alloy Pipe is a high-performance nickel-chromium alloy tube known for their excellent resistance to corrosion, oxidation, and high temperatures. ① STANDARD: ASTM B163/ASME SB163,ASTM B167 / ASME SB167....② OD RANGE : 6-457 MM③ THICKNESS RANGE: 1-65 MM
Inconel 601 Seamless Nickel Alloy Steel Tube
Inconel 601 Seamless Nickel Alloy Steel Tube is made from a high-performance nickel-chromium-iron alloy, specially designed to offer outstanding oxidation resistance and mechanical strength at elevated temperatures. This makes them an ideal choice for demanding industrial environments. ① STANDARD: ASTM B167/ASME SB167/ASTM B829 ...② OD RANGE : 6-257 MM③ THICKNESS RANGE: 1-35 MM
Inconel 718 Seamless Nickel Alloy Steel Tube
Inconel718 Seamless Nickel Alloy Steel Tube are high-strength, corrosion-resistant tubes crafted from a nickel-chromium alloy known for exceptional performance in extreme environments.① STANDARD: ASTM B983...② OD RANGE : 6-257 MM③ THICKNESS RANGE: 1-35 MM
Seamless ASTMB 668 UNS N08028 1.4563 Alloy 28 Incoloy Alloy Steel Pipe
ASTM B668 UNS N08028 Seamless Incoloy Pipe also called Alloy 28 Incoloy Alloy Steel Pipe or 1.4563 Alloy Steel Pipe.ASTM B668 is the standard specification for seamless pipe and tube made from UNS N08028 (also known as Incoloy Alloy 028 or Sanicro 28), an iron-nickel-chromium-molybdenum alloy designed for superior resistance to corrosive environments, particularly sulfuric acid and phosphoric acid services. This material is commonly used in chemical processing, oil and gas, and marine applications due to its high strength, pitting resistance, and stress corrosion cracking resistance.
Online Inquiry
If you have any enquiry about quotation or cooperation,please feel free to email us at admin@xtd-ss.com or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.