ASTMB161 B163 Nickel 201 Alloy (UNS N02201)/2.4068 Seamless Nickel Alloy Steel Tube
① STANDARD: ASTM B161/ ASTM B163/ASME SB161/ASME AB163② OD RANGE : 6-257 MM③ THICKNESS RANGE: 1-35 MM
Nickel 201 Alloy (UNS N02201)/2.4068 Chemical Composition
|
Grade |
Ni |
Cu |
Fe |
Mn |
C |
Si |
S |
|
UNS N02200 |
≥99.00 |
≤0.25 |
≤0.40 |
≤0.35 |
≤0.015 |
≤0.35 |
≤0.01 |
|
UNS N02201 |
≥99.00 |
≤0.25 |
≤0.40 |
≤0.35 |
≤0.02 |
≤0.35 |
≤0.01 |
Nickel 201 Alloy (UNS N02201)/2.4068 Mechanical Properties
|
Grade |
Condition |
Tensile Strength |
Yield Strength |
Elongation(%) |
|
N02201 |
Annealed |
≥50(345)ksi(MPa) |
≥12(83)ksi(MPa) |
≥40 |
|
N02201 |
Stress-relieved |
≥60(414)ksi(MPa) |
≥30(207)ksi(MPa) |
≥15 |
|
N02201 OD≤127MM |
Annealed |
≥50000(380)psi(MPa) |
≥12000(80)psi(MPa) |
≥35 |
|
N02201 OD>127MM |
Annealed |
≥50000(345)psi(MPa) |
≥10000(70)psi(MPa) |
≥40 |
|
N02201 |
Stress-relieved |
≥60000(415)psi(MPa) |
≥30000(205)psi(MPa) |
≥15 |
the ASTM B161 ASTMB163 Nickel alloy seamless tube and pipe tolerance
Nickel 201 Alloy (UNS N02201)/2.4068 Applications
Used primarily for parts requiring excellent corrosion and strong magnetic properties such as:
- lead wires
- battery components
- transducers
- sparking electrodes
- heat exchangers
- implantable battery anode/connector tabs for CRM and Neurostimulation devices
- stamped or etched fabrications
One of our Services--Testing
- EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
- Raw Materials Certificate
- 100% Radiography Test Report
- 100% PMI
- Heat Treatment Charts
- Third Party Inspection Report
- Surface roughness and size measurement
- Manufacturer Test Certificate( Impact Testing, Flatten, Spin,Curve, Hardness, Intergranular ,Point corrosions, Grain size, ET,UT, HT...)
- Laboratory Test Certificate from Govt. Approved Lab
- ......
One of our Services--End of Pipe and Tube
- BE : Beveled end
- BBE : Bevel both ends
- BLE : Bevel large end
- BSE : Bevel small end
- TOE / POE = Treaded One End / Plain One End
- TOE / BOE = Treaded One End / Beveled One End
- POE / BOE = Plain One End / Beveled One End
- TBE = Treaded Both Ends
- PBE = Plain Both Ends
One of our Services--Packing
- Ply Wooden Boxes
- PE Fabric Bundles
- Standard seaworthy export packing
- Plastic Bags, or as required
One of our Services--Marking
- Supplier / Manufacturer Name or Custom Logo - on request
- Specification
- Material Grade
- Nominal Size
- Schedule or Wall Thickness
- Method of Manufacturing (Seamless or Welded)
- Heat Number
Marked Pipe Sample: XTD ASTM B163 UNS N02201 SEAMLESS 42.2x 3.56*6000MM HEAT NO. 2023121205A15
Nickel 201 Alloy (UNS N02201)/2.4068 Material Summary
Nickel 201 alloy is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures.
It is resistant to acids and alkalis, and dry gases at room temperature.
Alloy 201 is a wrought commercially pure Nickel with a maximum carbon level of 0.02%. This alloy provides highly ductile mechanical properties across a wide temperature range.It provides corrosion resistance in neutral to moderately reducing environments. Nickel 201 is ferromagnetic. It provides high thermal and electrical conductivity in comparison to nickel-base alloys, stainless and low alloy steels. Because of its low carbon content (.02% max.) Nickel 201 may be considered for service above 600 °F (316 °C), where alloy 200 with higher carbon content is not recommended.
Standard download
Related Products
ASTMB983 Inconel718 Alloy718 UNSN07718 2.4668 H41690 Seamless Nickel Alloy Steel Tube
① STANDARD: ASTM B983...② OD RANGE : 6-257 MM③ THICKNESS RANGE: 1-35 MM
ASTMB622 UNS N08031/1.4562/Alloy31/X1NiCrMoCu32-28-7 Seamles Nickel Alloy Steel Pipe
① STANDARD: ASTM B622/ ASTM B829 ...② OD RANGE : 6-457 MM③ THICKNESS RANGE: 1-45 MM
ASTMB622 HastelloyC276/AlloyC-276/N10276/2.4819/Seamless Nickel Alloy Steel Tube
① STANDARD: ASTM B622 B619...② OD RANGE : 6-257MM③ THICKNESS RANGE: 1-35 MM
ASTMB622 ASTMB829 Hastelloy B3/Alloy B3/ UNS N10675/2.4600 Seamless Nickel Alloy Steel Tube
① STANDARD: ASTM B622/ ASTM B829 ...② OD RANGE : 6-257 MM③ THICKNESS RANGE: 1-35 MM
Online Inquiry
If you have any enquiry about quotation or cooperation,please feel free to email us at admin@xtd-ss.com or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.