|
C |
Si |
Mn |
Ni |
P |
S |
Cr |
Mo |
N |
Cu |
|
≤0.02 |
≤0.50 |
2.00-4.00 |
21.00-23.00 |
≤0.03 |
≤0.005 |
23.00-25.00 |
7.00-8.00 |
0.45-0.55 |
0.30-0.16 |
654SMO/1.4652/UNSS32654 Chemical Composition
654SMO/1.4652/UNSS32654 Mechanical Properties
|
Tensile strength (MPa) |
0.2% proof strength (MPa) |
Min. elongation at fracture (%) |
Brinell hardness (HB) |
|
≥750 |
≥430 |
≥40 |
≤310 |
The ASTMA312 Size Tolerance
|
Standard |
Outside Diameter |
Thickness |
Length |
||||
|
ASTM A312 |
|
O.D. ≦ |
48.26mm |
+0.40mm, |
-0.80mm |
Nominal Thickness ±12.5% |
0mm to +6mm |
|
48.26mm < |
O.D. ≦ |
114.3mm |
±0.80mm, |
|
|||
|
114.3mm < |
O.D. ≦ |
219.08mm |
+1.60mm, |
-0.80mm |
|||
|
219.08mm < |
O.D. ≦ |
457.2mm |
+2.40mm, |
-0.80mm |
|||
|
457.2mm < |
O.D. ≦ |
660.4mm |
+3.20mm, |
-0.80mm |
|||
|
660.4mm < |
O.D. ≦ |
836.6mm |
+4.00mm, |
-0.80mm |
|||
|
863.6mm < |
O.D. |
|
+4.80mm, |
-0.80mm |
|||
654SMO/1.4652/UNSS32654 Applications
- 1) Refining, chemical equipment;
- 2) Flue gas desulfurization device for thermal power generation, wastewater treatment;
- 3) Atomic power generation, comprehensive utilization of coal, and ocean wave power generation;
- 4) Marine structures in the sea environment, seawater desalination, marine aquaculture, seawater heat exchange;
- 5) Salt production, soy sauce brewing food field;
- 6) Paper industry, high concentration chloride ion environment of various bleaching devices;
- 7) Oil and gas industry equipment;
- 8) Offshore platforms, heat exchangers, underwater equipment, firefighting equipment;
- 9) Chemical processing industry, utensils and pipeline industry;
- 10) Desalted plants, high pressure RO plants and submarine pipelines;
- 11) High-strength, corrosion-resistant mechanical equipment and components;
- 12) Others.
One of our Services--Testing
- EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
- Raw Materials Certificate
- 100% Radiography Test Report
- 100% PMI
- Heat Treatment Charts
- Third Party Inspection Report
- Surface roughness and size measurement
- Manufacturer Test Certificate( Impact Testing, Flatten, Spin,Curve, Hardness, Intergranular ,Point corrosions, Grain size, ET,UT, HT...)
- Laboratory Test Certificate from Govt. Approved Lab
- ......
One of our Services--End of Pipe and Tube
- BE : Beveled end
- BBE : Bevel both ends
- BLE : Bevel large end
- BSE : Bevel small end
- TOE / POE = Treaded One End / Plain One End
- TOE / BOE = Treaded One End / Beveled One End
- POE / BOE = Plain One End / Beveled One End
- TBE = Treaded Both Ends
- PBE = Plain Both Ends
One of our Services--Packing
- Ply Wooden Boxes
- PE Fabric Bundles
- Standard seaworthy export packing
- Plastic Bags, or as required
One of our Services--Marking
- Supplier / Manufacturer Name or Custom Logo - on request
- Specification
- Material Grade
- Nominal Size
- Schedule or Wall Thickness
- Method of Manufacturing (Seamless or Welded)
- Heat Number
Marked Pipe Sample: XTD ASTM A312 UNS S32654 SEAMLESS 42.2x 3.56*6000MM HEAT NO. 2023121205A15
654SMO/1.4652/UNSS32654 Material Summary
654SMO(EN 1.4652/UNSS32654) is a special stainless steel containing a high percentage of Nickel and Chromium containing 7% Molybdenum,which is the highest corrision restistance in the world.
It has a fairly high electrical conductivity among wrought superaustenitic stainless steels. In addition, it has the lowest thermal conductivity and very high tensile strength.
654SMo (S32654, 1.4652) super austenitic stainless steel features very good local corrosion resistance, good pitting resistance and good stress corrosion resistance under seawater, aeration, gap and low speed scouring conditions. It can be used as a good substitute to nickel-based alloys and titanium alloys. When it comes to high-temperature resistance or corrosion resistance, it is also superior to 904L and 254SMo.
