Monel 400 Seamless Tubes is a high-strength, corrosion-resistant tubing made from a nickel-copper alloy known as Monel 400. It is produced without any welded joints, ensuring superior structural integrity and leak-proof performance.① STANDARD: ASTM B165 ...② OD RANGE : 6-257 MM③ THICKNESS RANGE: 1-35 MM
|
Grade |
Cu |
Fe |
Mn |
C |
Si |
S |
Ni |
|
N04400 |
28.00-34.00 |
≤2.50 |
≤2.00 |
≤0.30 |
≤0.50 |
≤0.024 |
≥63.00 |
|
Grade |
Condition |
Tensile Strength ksi(MPa) |
Yield Strength ksi(MPa) |
Elongation(%) |
|
N04400 |
Annealed |
≤85(585) |
≥28(195) |
≥32 |
|
N04400 |
Half-Hard |
≥85(585) |
≥55(380) |
≥12 |
|
N04400 |
Full-Hard |
≥110(760) |
≥90(620) |
≥3 |

Remember that Monel 400’s unique combination of properties allows it to thrive in challenging environments across various industries.
monel 400 material is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability, and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.
Alloy 400 is a very versatile corrosion resistant material. It exhibits resistance to corrosion in many reducing environments, and it is generally more resistant than higher copper alloys to oxidizing media. Alloy 400 is one of the few materials that will withstand contact with fluorine, hydrofluoric acid, hydrogen fluoride or their derivatives. The alloy has been found to offer exceptional resistance to hydrofluoric acid in all concentrations up to the boiling point. Alloy 400 also resists sulfuric and hydrochloric acids under reducing conditions. It has outstanding resistance to neutral and alkaline salts and has been utilized for many years as a material of construction for salt plants.
Alloy 400 is one of the most widely used materials for marine applications, shipbuilding and seawater desalination plants. The alloy exhibits very low rates of corrosion in flowing sea or brackish water. However, under stagnant conditions, the alloy can encounter crevice and pitting corrosion. Alloy 400 resists stress corrosion cracking and pitting in most fresh and industrial water applications.
Seamless Hastelloy C276 Nickel Alloy Steel Pipe is a high-strength, corrosion-resistant tube designed to perform reliably in aggressive chemical and high-temperature environments.① STANDARD: ASTM B622 B619...② OD RANGE : 6-457 MM③ THICKNESS RANGE: 1-45 MM
Hastelloy B3 Seamless Nickel Alloy Steel Pipe is a high-performance nickel-molybdenum alloy tube specifically designed to offer excellent resistance to hydrochloric acid and other strongly reducing chemicals. Known for their enhanced thermal stability and improved fabricability, these tubes are widely used in harsh chemical environments. ① STANDARD: ASTM B622/ ASTM B829 ...② OD RANGE : 6-457 MM③ THICKNESS RANGE: 1-45 MM
Seamless UNS N08020 Nickel Alloy Steel Pipe refers to a high-performance corrosion-resistant alloy pipe, commonly known as Alloy 20 or Carpenter 20, is a nickel-iron-chromium austenitic alloy designed primarily for superior corrosion resistance in harsh chemical environments, particularly sulfuric acid. It is not a traditional carbon or low-alloy steel but a high-performance nickel-based superalloy with iron as a significant component (typically 32-46%). The "nickel alloy steel" designation in your query likely refers to its classification as a nickel-chromium-iron alloy used in steel-like piping applications. This material is stabilized with niobium (columbium) to prevent sensitization and intergranular corrosion, making it ideal for general corrosive service.Alloy 20 seamless pipes are produced under the ASTM B729 specification (or its ASME SB729 boiler code equivalent), which covers seamless, cold-worked, or hot-finished pipes and tubes in UNS N08020, N08026, and N08024 grades. These pipes are furnished in a stabilized-annealed condition unless otherwise specified.
UNS N08120 Seamless Nickel Alloy Steel Tube, also known as VDM® Alloy N08120 or Nicrofer 3725 Nb, is a nickel-chromium alloy used in industrial heating applications. Let’s explore its uses in various industries:Furnace Construction:Industrial Annealing Furnaces: UNS N08120 is commonly used in annealing furnaces where elevated temperatures are involved.Waste Incineration Plants: It finds applications in waste incinerators due to its high mechanical strength and resistance to carburization and sulfidation.Chemical Industry:In chemical processing, UNS N08120 is employed for components exposed to aggressive environments.Its resistance to carburizing and sulfiding atmospheres ensures durability in chemical plants.Environmental Protection Plants:The alloy contributes to environmental protection systems.It is used in applications where high temperatures and corrosion resistance are critical.Automotive Industry:UNS N08120 may find use in automotive components subjected to extreme heat.Its properties make it suitable for specific applications in this industry.Power Plants:In power generation facilities, UNS N08120 is utilized for superheaters, recuperators, and other high-temperature components.Its creep resistance and operating temperature range contribute to efficient power plant operation.Typical applications include furnace muffles, heat treatment baskets, wire cloth, conveyor belts, and superheaters for tubes.
If you have any enquiry about quotation or cooperation,please feel free to email us at admin@xtd-ss.com or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.