HomeProducts & servicesNickel 201 Seamless Nickel Alloy Steel Pipe

Nickel 201 Seamless Nickel Alloy Steel Pipe

Nickel 201 Seamless Nickel Alloy Steel Pipe is a high-purity, low-carbon nickel alloy tube known for its excellent mechanical properties, corrosion resistance, and thermal conductivity. These tubes are ideal for use in chemical processing, electronics, and marine applications where high performance and purity are essential.
① STANDARD: ASTM B161/ ASTM B163/ASME SB161/ASME AB163

② OD RANGE : 6-457 MM

③ THICKNESS RANGE: 1-45 MM

Nickel 201 Alloy (UNS N02201)/2.4068 Chemical Composition

Grade

Ni

Cu

Fe

Mn

C

Si

S

UNS N02200
≥99.00
≤0.25
≤0.40
≤0.35
≤0.015
≤0.35
≤0.01

UNS N02201

≥99.00

≤0.25

≤0.40

≤0.35

≤0.02

≤0.35

≤0.01


Note:
1.Element shall be determined arithmetically by difference.


Nickel 201 Alloy (UNS N02201)/2.4068 Mechanical Properties

Grade

Condition

Tensile Strength

Yield Strength

Elongation(%)

N02201

Annealed

≥50(345)ksi(MPa)

≥12(83)ksi(MPa)

≥40

N02201

Stress-relieved

≥60(414)ksi(MPa)

≥30(207)ksi(MPa)

≥15

N02201 OD≤127MM

Annealed

≥50000(380)psi(MPa)

≥12000(80)psi(MPa)

≥35

N02201 OD>127MM

Annealed

≥50000(345)psi(MPa)

≥10000(70)psi(MPa)

≥40

N02201

Stress-relieved

≥60000(415)psi(MPa)

≥30000(205)psi(MPa)

≥15

the ASTM B161 ASTMB163 Nickel alloy seamless tube and pipe tolerance

Nickel 201 Alloy (UNS N02201)/2.4068 Applications

Used primarily for parts requiring excellent corrosion and strong magnetic properties such as:

One of our Services--Testing

  • EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • 100% PMI
  • Heat Treatment Charts
  • Third Party Inspection Report
  • Surface roughness and size measurement
  • Manufacturer Test Certificate( Impact Testing, Flatten, Spin,Curve, Hardness, Intergranular ,Point corrosions, Grain size, ET,UT, HT...)
  • Laboratory Test Certificate from Govt. Approved Lab
  • ......

Nickel 201 Alloy (UNS N02201)/2.4068 Material Summary

Nickel 201 alloy is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures.

It is resistant to acids and alkalis, and dry gases at room temperature.

Alloy 201 is a wrought commercially pure Nickel with a maximum carbon level of 0.02%. This alloy provides highly ductile mechanical properties across a wide temperature range.It provides corrosion resistance in neutral to moderately reducing environments. Nickel 201 is ferromagnetic. It provides high thermal and electrical conductivity in comparison to nickel-base alloys, stainless and low alloy steels. Because of its low carbon content (.02% max.) Nickel 201 may be considered for service above 600 °F (316 °C), where alloy 200 with higher carbon content is not recommended.

Related Products

Seamless Incoloy 825 Nickel Alloy Steel Pipe

Seamless Incoloy 825 Nickel Alloy Steel Pipe is a high-performance piping product made from Incoloy 825 (a registered trademark of Special Metals Corporation), an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium.It is a seamless pipe, meaning it's manufactured without a welded seam, providing superior structural integrity, especially under high pressure and temperature applications.
The alloying elements provide broad resistance to a wide range of corrosive environments:
• Chloride-Ion Stress-Corrosion Cracking: High nickel content provides excellent resistance.
• Pitting and Crevice Corrosion: Enhanced by the molybdenum content.
• Reducing Agents and Acids: Nickel, molybdenum, and copper provide outstanding resistance to agents like sulfuric acid and phosphoric acid.
• Oxidizing Agents: Chromium confers resistance to oxidizing substances like nitric acid.
• Intergranular Corrosion: The titanium addition, combined with appropriate heat treatment, stabilizes the alloy, making it resistant to intergranular attack, even after welding.

① STANDARD: ASTM B163 ASTMB423 Seamless Superheater, Condenser, Hydraulic, Boiler and Heat-Exchanger Tubes

② OD RANGE : 6-457 MM

③ THICKNESS RANGE: 1-45 MM

Hastelloy B2 Seamless Nickel Alloy Steel Pipe

Hastelloy B2 Seamless Nickel Alloy Steel Pipe is a high-performance nickel-molybdenum alloy tube designed to resist strong reducing agents such as hydrochloric acid and other aggressive chemical environments. Ideal for use in industries like chemical processing, power generation, marine, and pharmaceuticals, these tubes offer outstanding corrosion resistance, mechanical strength, and thermal stability.
① STANDARD: ASTM B622/ASME SB622 for seamless , ASTM B619 for welded ...

② OD RANGE : 6-457 MM

③ THICKNESS RANGE: 1-45 MM

Hastelloy C-4 Seamless Stainless Steel Pipe

Hastelloy C-4 Seamless Stainless Steel Pipe offer excellent chemical stability and mechanical properties. Compared to C276, Alloy C4 offers superior resistance to stress-corrosion cracking and better performance in high-temperature air, making it ideal for aggressive chemical process applications.
① STANDARD: ASTM B161/ ASTM B163/ ASTM B167/ ASTM B444/ ASTM B622 ...

② OD RANGE : 6-457 MM

③ THICKNESS RANGE: 1-45 MM

Nickel 200 Seamless Nickel Alloy Steel Tube

Nickel 200 Seamless Nickel Alloy Steel Tube is high-purity nickel tube known for their excellent resistance to corrosion, strong mechanical properties, and ability to perform under extreme temperatures and harsh chemical environments. Ideal for chemical processing, power generation, and marine applications, these tubes are designed to offer long-lasting performance with minimal maintenance.
① STANDARD: ASTM B161/ ASTM B163/ASME SB161/ASME AB163

② OD RANGE : 6-457 MM

③ THICKNESS RANGE: 1-45 MM

Online Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at or use the following enquiry form. Our sales will contact you within 24 hours. Thank you for your interest in our products.